§

November 21, 2026

How to Pressure Clean Exposed Aggregate for a Flawless Finish

By @andreszlfh903

❦

Exposed aggregate adds texture and visual appeal to Geelong driveways, paths and outdoor entertaining areas. However, dirt, oil and organic growth can collect between the stones, leaving the surface looking dull and potentially slippery. The key to a clean, even finish is controlled pressure, suitable cleaning products and careful rinsing—not simply using the most powerful setting.

Check the Surface Before You Start

Inspect the concrete for cracks, loose stones, crumbling cement and peeling sealer. Pressure washing can worsen existing damage, so repair unstable areas before cleaning. If the concrete is newly installed, follow the installer’s curing and cleaning instructions rather than assuming it is ready for high-pressure washing.

Check whether the surface is sealed. A patchy, cloudy or flaking coating may need specialist treatment; stronger pressure is not a reliable way to restore it.

Prepare the Area and Manage Runoff

Sweep away leaves, grit and loose debris. Move outdoor furniture and vehicles, protect nearby electrical fittings, and keep children and pets away from the work area. Wear enclosed, non-slip footwear and eye protection, and never direct the jet towards people or animals.

Before pressure cleaning in Geelong, check current Barwon Water restrictions and any applicable water-use conditions. Keep detergent, oil, sediment and contaminated wash water out of stormwater drains. Use suitable barriers and collection equipment where necessary, and confirm appropriate disposal arrangements with the relevant local authority.

How to Pressure Clean Exposed Aggregate Step by Step

  1. Pre-treat stains. Apply a cleaner labelled as suitable for exposed aggregate and compatible with any existing sealer. Use a concrete-safe degreaser for oil marks, following the product’s dilution and dwell-time instructions. Do not let the cleaner dry on the surface.
  2. Test a small, inconspicuous area. Start at the lowest effective pressure with a wide fan nozzle. Hold the nozzle approximately 30–45 centimetres away initially, then assess the result before adjusting. There is no single safe pressure setting for every aggregate surface.
  3. Clean in consistent passes. Keep the nozzle moving and maintain an even distance. Work in manageable sections with slightly overlapping passes. Avoid zero-degree nozzles and aggressive rotary nozzles, which can damage the cement between stones or strip sealer.
  4. Use a suitable surface cleaner where appropriate. A compatible attachment can help reduce striping on larger driveways, but it still requires appropriate pressure and continuous movement. Test it first.
  5. Rinse thoroughly. Work from higher areas towards your planned collection point. Remove loosened dirt and cleaner without allowing contaminated runoff to enter the street or stormwater system.
  6. Inspect once dry. Wet aggregate often looks darker and more uniform, so let the surface dry before judging the finish or deciding whether another gentle treatment is necessary.

Avoid Common Cleaning Mistakes

Do not hold the jet close to stubborn marks or repeatedly blast one spot. This can erode the cement matrix and loosen exposed stones. Avoid acid washing unless a qualified specialist recommends it for a specific treatment, as acids can etch concrete and affect some aggregates.

Never mix cleaning chemicals. In particular, chlorine-based products must not be mixed with acids or ammonia. Follow product labels and protect surrounding plants from spray and runoff.

Should You Reseal After Pressure Cleaning?

Cleaning does not automatically mean resealing is necessary. Assess the existing coating and choose a compatible product if protection needs renewing. The concrete must meet the sealer manufacturer’s dryness requirements, and Geelong’s changeable weather makes a suitable rain-free application window important.

For sloping driveways, pool surrounds and frequently https://gregoryvsjp139.brightsora.com/posts/pressure-cleaning-school-grounds-planning-for-safer-spaces wet paths, discuss slip resistance before selecting a sealer. A glossy finish is not always the safest or most practical choice.

When to Choose Professional Pressure Cleaning in Geelong

Professional help is worthwhile for extensive oil staining, damaged aggregate, failing sealers or sites where runoff is difficult to contain. Ask your Geelong pressure cleaning provider how they assess surface condition, select cleaning pressure and capture wastewater. A careful, surface-specific approach delivers a cleaner finish while protecting your concrete.

Geelong Pressure Cleaning Pros

(03) 8657 4277

❧